4/0 3C 2000V Type G-GC Mining Power Cable
Type G-GC cables are suitable for use in industrial and light- to medium-duty mining applications, heavy-duty service as power supply cable, power cable for mobile and portable electrical equipment at a continuous conductor temperature of 90°C. Type G-GC cables may be used in marina (wet) applications.
Conductors: Soft drawn flexible stranded tinned copper wires
Separator: Tape separator between conductor and insulation
Insulation: Ethylene-propylene rubber (EPR)
Grounding conductors: Soft drawn flexible stranded tinned copper. Green EPR insulation over conductors
Ground check conductor: Soft drawn flexible stranded tinned copper. Yellow: EPR insulation over conductor
Color Code: Black, white, red
Assembly: Power, ground check and grounds cores cabled together to form a round core.
Reinforcement: Single faced rubber filled binder tape over core.
Jacket: Black heavy duty, integral-filled CPE thermosetting compound.
Bending radius: Minimum 6 x outer diameter.
Type: Flat or Round
Standard: IEC, BS, DIN, VDE, ASTM, CSA or Customizede
Type G Mining Cable
Copper conductors, Ethylene Propylene Rubber (EPR) insulation, Extra Heavy Duty Two Layer Chlorinated Polyethylene (CPE) Jacket with Optional Reflective Stripes
Voltage: 2kV, 5kV
Core: 3 Core
Conductor: Flexible tinned copper
Insulation: EPR (90°C)
Insulation Shielding: Tinned copper and color-coded nylon braid
Ground Conductor: Flexible tinned copper located in the center of cable
Control Ground Conductor: Tinned Copper Conductor/EPR Insulation
Jacket: CPE (Blue, Green, Yellow, Orange, Red, Black)
Type W Mining Cable
Voltage: 600/2000V
Type: Round or Flat
Core: 2 Core, 3 Core, 4 Core
Conductor: Flexible tinned copper
Insulation: EPR (90°C)
Reinforcement: Synthetic yarn over assembly
Jacket: Mold-cured thermoset
Jacket Color: Black
Standard: IEC, BS, DIN, VDE, ASTM, CSA or Customized
Type SHD-GC Mining Cable
Heavy-duty high-voltage portable power cable for mining applications.
Voltage: 2kV, 5kV, 8kV, 15kV, 25kV
Type: Flat or Round
Conductor: Flexible tinned copper
Insulation: EPR (90°C)
Insulation Shielding: Tinned copper and color-coded nylon braid
Ground Check Conductor: Flexible tinned copper with yellow XLPE insulation
Ground Wires: Flexible tinned copper
Jacket: CPE or TPU
Standard: IEC, BS, DIN, VDE, ASTM, CSA or Customized
Type SHD-PCG Mining Cable
Voltage: 2kV, 5kV
Core: 3 Core
Conductor: Flexible tinned copper
Insulation: EPR (90°C)
Insulation Shielding: Tinned copper and color coded nylon braid
Ground Conductor: Flexible tinned copper located in the center of the cable
Control Ground Conductor: Tinned Copper Conductor/EPR Insulation
Jacket: CPE (Blue, Green, Yellow, Orange, Red, Black)
Type SHD-CGC Mining Cable
Voltage: 2kV, 5kV
Core: 3 Core
Conductor: Flexible tinned copper
Insulation: EPR (90°C)
Insulation Shielding: Tinned copper and color coded nylon braid
Ground Wires: Flexible tinned copper
Control Check Conductor: Tinned copper with yellow insulation located in the central of the cable
Separator Tape: Non-conducting
Jacket: CPE (Blue, Green, Yellow, Orange, Red, Black)
Type VFD Mining Cable
Voltage: 2000V
Core: 3C conductor + 3C ground wire
Conductor: Tinned copper
Ground Conductor: flexible tinned copper
Power Conductor: Extra flexible tinned rope stranded
Ground Check Wire Optional: Flexible tinned copper with yellow insulation.
Insulation: EPR (90°C)
Shield: Overall tinned copper braid plus aluminum/polyester tape providing 100% coverage
Jacket: CPE (Black)
Type MP Mining Cable
Voltage: 5/15kV
Conductor: Copper
Core: 3Core
Strand Shield: Semi-conducting layer
Insulation: EPR
Insulation Shield: Semi-conducting layer under copper tape
Ground Wires: Tinned copper
Ground Check Conductor: 8 AWG 7-wire copper with yellow polypropylene insulation
Jacket: CPE
Type MP-GC Mining Cable
Voltage: 25/35kV
Conductor: Copper
Core: 3Core
Strand Shield: Semi-conducting layer
Insulation: XLPE, EPR
Insulation Shield: Semi-conducting layer under copper tape
Ground Wires: Tinned copper
Ground Check Conductor: 8 AWG 7-wire copper with yellow polypropylene insulation
Jacket: PVC
Mining control cable L-2YY(Z)Y KF 40
Voltage: 100/100V (<300/300V)
Conductor: Copper
Insulation: Thermoplastistic compound (PE)
Core identification First Quad Layer:
1. Strain: Red-Yellow, 2. Strain: Blue-Green
Quad:
1. Strain: Natural Color-Yellow, 2. Strain: Blue-Green
Core arrangement Four cores stranded as Star Quad (Twisted-Quad). These quads are subsequently stranded as
cable core arrangement.
Inner sheath Thermoplastic compund (PVC)
Reinforcement Braiding of steel wires between inner and outer sheath
Outer sheath Thermoplastic compound (PVC), Color: Grey, Cold resitant
TYPE 241 1.1kV ~ 11kV Rubber Screened Mining Cable
Voltage: Type 241.1 – 1.1kV ; Type 241.3 – 3.3kV ; Type 241.6 – 6.6kV ; Type 241.11 – 11kV
Conductor: Tinned annealed copper wires
Core: 3Core
Separator/Screen: 1.1kV: Paper separator; For other nominal voltages semi-conductive thermosetting compound over conductors
Insulation: EPR type R-EP-90
Insulation Screen: Semi-conductive thermosetting compound
Cable Assembly: Three screened power and three earth cores laid up with right hand direction on cradle separator with central pilot core
Inner Sheath: Semi-conductive thermosetting compound
Earth Covering: Semi-conductive thermosetting compound
Cradle Separator: Semi-conductive thermosetting compound
Reinforcing Braid : Polyamide Yarns
Sheath: CSP (Chlorosulfonated polyethylene) thermosetting compound; HD-90 – extra heavy duty, oil resistance and flame retardant
TYPE 240 1.1kV ~ 11kV Screened Mining Cable
Voltage: Type 240.1 – 1.1kV ; Type 240.3 – 3.3kV ; Type 240.6 – 6.6kV ; Type 240.11 – 11kV
Conductor: Tinned annealed copper wires
Separator/Screen: 1.1kV: Paper separator; Other voltages: semi-conductive thermosetting compound
Insulation: EPR type R-EP-90
Insulation Screen: 1.1kV: Synthetic tape; From 3.3kV: Semi-conductive thermosetting compound
Screen: Tinned copper/polyamide braid
Interstitial Pilots: EPR covered flexible stranded tinned Copper
Cable Assembly: 3x screened power cores with right hand lay up on cradle separator with 3x pilot cores
Cradle Separator: Semi-conductive thermosetting compound
Sheath: HD-PCP (Heavy Duty Polychloroprene) – extra heavy duty, oil resistance and flame retardant.
Optional open polyamide braid between layer of sheathing
Sheath Colour: Black
TYPE 245 1.1kV ~ 6.6kV Flexible Rubber Mining Cable
Voltage: Type 245.1 – 1.1kV ; Type 245.3 – 3.3kV ; Type 245.6 – 6.6kV
Conductor: Flexible stranded tinned annealed copper
Conductor Screen: Semi-conductive compound for cables having a voltage rating of 3.3kV and above
Insulation: EPR (Ethylene Propylene Rubber)
Insulation Screen: Semi-conductive elastomer
Cradle Separator: Semiconductive PCP (Polychloroprene)
Central Extensible Pilot: EPR covered flexible stranded tinned copper
Overall Core Screen: Semiconductive PCP (Polychloroprene) filling and covering
Interstitial Earth Conductor: Semi-conductive PCP (Polychloroprene) covered flexible stranded tinned copper
Reinforcing Braid: Open-weave yarns
Sheath: Heavy duty PCP (Polychloroprene). (CPE/CSP sheath can be offered upon request)
Sheath Colour: Black
Why Choose Us
Please feel free to leave your requirement, We will reply you in 12 hours.
