Multi Conductor Control Cables 0,6/1kV Armoured

Application

These cables are intended for use as control and power cables aboard ship and on off-shore oil rings. The cables are constructed in accordance with the recommended practice for marine cable for use on fixed or floating facilities, IEEE 1580. Excellent resistance to oil, abrasion petrochem fluids, moisture salty water and sunlight.

Cable Structure

CONDUCTOR : Soft annealed stranded bare or tinned copper per IEEE1580
SEPARATION TAPE : Polyester tape if required
INSULATION : Type P flame retardant cross-linked polyolefin compound, X110 meeting the requirements for IEEE 1580 Type P and UL1309
JACKET : CPE, Flame retardant, oil abrasion, chemical and sunlight resistant thermosetting compound as required IEEE1580
ARMOR : Basket weave bronze wire armour per IEEE1580 and UL1309/ CSA C22.2 No.245. Tinned copper wire available by request

Standards & Main Characteristics

REFERENCE STANDARD : IEEE 1580, UL 1309, CSA C22.2 No.245
TEMPERATURE RATİNG : Untel 125°C / UL CSA 110°C / IEEE 100°C
FLAME RETARDANT : IEEE 1202 & IEC 60332-3 cat. A
COLD BEND/IMPACT : -40°C / -35°C (CSA 22.2 No.03)

Technical Specifications

Size AWG	Number of Conductors	Diameter (inches)	Weight (lbs/Mft)	Ampacity 110ºC	Ampacity 100ºC
16	7	0.525	255	12	11
16	8	0.581	265	12	11
16	10	0.681	366	9	8
16	16	0.769	465	9	8
16	20	0.844	560	9	8
16	24	0.973	718	8	7
16	37	1.098	819	6	6
16	44	1.223	980	6	6
16	60	1.348	1256	6	6
14	6	0.589	264	21	20
14	7	0.589	297	19	18
14	10	0.741	406	14	13
14	12	0.763	428	14	13
14	14	0.799	540	14	13
14	20	0.966	812	14	13
14	24	1.063	892	12	11
14	30	1.121	965	12	11
14	37	1.203	1135	11	10
14	44	1.343	1260	10	9
12	6	0.661	405	27	25
12	10	0.821	500	17	16
12	20	1.072	890	17	16
12	24	1.183	1167	15	14
12	37	1.343	1467	13	12