Fire Resistance BFOU, BFOU(i/c), FROU, FROU(i/c) Offshore Marine Instrument/Control Wind Cable

Voltage: 0.6/1kV
Conductor: Tinned Copper class 2 or 5
Insulation： Mica tape + Halogen Free EPR
2 conductors ……………………. blue + brown
3 conductors ……………………. brown + black + grey
4 conductors ……………………. brown + black + grey + blue
5 or more conductors ……….white numbered.
Filling sheath: Flame retardant and halogen free compound
Screen: Tinned annealed copper wire braid
Outer sheath: low smoke and halogen free SHF MUD.
Applicaiton: BFOU P5/P12 is used for permanent installation in the control circuits and lights and emergency lighting and critical offshore units where there are demands for safety.

Voltage: 250V
Conductor: Tinned Copper class 2
Insulation: Mica tape + Halogen Free EPR
Filling sheath: Flame retardant and halogen free compound
Collective screen: Pairs/triples are laid-up and collectively screened by copper backed polyester tape in contact with a stranded tinned copper drain wire.
Armoured: Tinned annealed copper wire braid
Outer sheath: Flame retardant, halogen free and mud resistant thermoset compound, Grey.
Applicaiton: BFOU(C) S4/S8 is used in fixed installations for control, instrumentation and telecommunication in both explosion and safe areas, in emergency and critical systems where requirement for fire resistance exists.

Voltage: 250V
Conductor: Tinned Copper class 2
Insulation: Mica tape + Fire resistance EPR
Filling sheath: Flame retardant and halogen free compound
Screen: Every pair/triple is screened with copper backed polyester tape in contact with a stranded tinned copper drain wire, wrapped with polyester tape.
Armoured: Tinned annealed copper wire braid
Outer sheath: Flame retardant, halogen free and mud resistant thermoset compound, Grey.
Applicaiton: BFOU(I) S3/S7 is used in fixed installations for control, instrumentation and telecommunication in both explosion and safe areas, in emergency and critical systems where requirement for fire resistance exists

Voltage: 0.6/1kV
Conductor: Tinned Copper class 2
Insulation： Ethylene propylene rubber (EPR)
2 conductors ……………………. blue + brown
3 conductors ……………………. brown + black + grey
4 conductors ……………………. brown + black + grey + blue
5 or more conductors ……….white numbered.
Filling sheath: Flame retardant and halogen free compound
Screen: Tinned annealed copper wire braid
Outer sheath: Flame retardant, halogen free and mud resistant thermoset compound black.
Applicaiton: RFOU P1/P8 is used in fixed installations for control, instrumentation and telecommunication in both explosion and safe areas, in emergency and critical systems.

Voltage: 250V
Conductor: Tinned Copper class 2
Insulation：EPR
Filling sheath: Flame retardant and halogen free compound
Common screen: Pair/triple are laid up and collectively screened by copper backed polyester tape in contact with a stranded tinned copper drain wire.
Armoured: Tinned annealed copper wire braid
Outer sheath: Flame retardant, halogen free and mud resistant thermoset compound, grey.
Applicaiton: RFOU(C) S2/S6 is used in fixed installations for control, instrumentation and telecommunication in both explosion and safe areas, in emergency and critical systems.

Voltage: 250V
Conductor: Tinned Copper class 2
Insulation：Ethylene propylene rubber (EPR)
Filling sheath: Flame retardant and halogen free compound
Screen: Every pair/triple is screened with copper backed polyester tape in contact with a stranded tinned copper drain wire, wrapped with polyester tape.
Armoured: Tinned annealed copper wire braid
Outer sheath: Flame retardant, halogen free and mud resistant thermoset compound, grey.
Applicaiton: RFOU(I) S1/S5 is used in fixed installations for control, instrumentation and telecommunication in both explosion and safe areas, in emergency and critical systems where requirement for fire resistance exists.