APPLICATION
MV-105 cable is primarily used for power circuits in commercial, industrial, refinery and petro-chemical plants; utility power generation and substations. The cable can be installed in wet or dry applications and is for use in aerial, conduit, open tray, and underground duct installations. It can be used in direct burial if installed with a ground conductor in close proximity. The cable is approved for temperature up to 105°C.
MV-105 Copper Single Conductor 5-35 kV, NLEPR/PVC Copper Tape Shield, 133% / 100%
Voltage: 5/8kV, 15kV, 25KV, 35kV
CONDUCTORS: Class B annealed compact or compressed bare copper per ASTM
CONDUCTOR SHIELD: Extruded thermoset semi-conducting stress-control layer over conductor
INSULATION: High dielectric strength lead-free EPR insulation
INSULATION SHIELD: Extruded, strippable semi-conducting layer over the insulation
METALLIC SHIELD: Helically applied 5 mil annealed copper tape over the insulation shield with an overlap of 25%
JACKET: Black lead-free, flame-retardant, moisture and sunlight resistant polyvinyl chloride (PVC) jacket tightly applied over the copper tape
MV-105 Copper Three Conductor 5-35 kV, NLEPR/PVC Copper Tape Shield, 133% / 100%
Voltage: 5/8kV, 15kV, 25KV, 35kV
Conductor: Class B compressed stranded bare copper per ASTM
Conductor Shield: Semi-conducting cross-linked copolymer
Insulation: No Lead Ethylene Propylene Rubber (NL-EPR) 133% / 100% Insulation Level
Insulation Shield: Strippable semi-conducting cross-linked copolymer
Copper Tape Shield: Helically wrapped 5 mil copper tape with 25% overlap
Grounding Conductor: Class B compressed stranded bare copper ground per ASTM B3 and ASTM B8 (Tinned Copper per ASTM B33 optional)
Filler: Wax paper filler
Binder: Poly glass tape
Overall Jacket: Polyvinyl Chloride (PVC)
MV-105 Copper Single Conductor TR-XLPE / PVC Cable 5 kV – 35 kV, Cu-Tape Shielded, 133% / 100%
Voltage: 5/8kV, 15kV, 25KV, 35kV
Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8 (Tinned Copper per ASTM B33 optional)
Conductor Shield: Semi-conducting cross-linked copolymer
Insulation: Tree Retardant Cross Linked Polyethylene (TRXLPE) 133% or 100% Insulation Level
Insulation Shield: Strippable semi-conducting cross-linked copolymer
Copper Tape Shield: Helically wrapped 5 mil copper tape with 25% overlap
Overall Jacket: Polyvinyl Chloride (PVC)
MV-105 Aluminum Single Conductor 5-35 kV, NLEPR/PVC Copper Tape Shield, 133% / 100%
Voltage: 5/8kV, 15kV, 25KV, 35kV
Conductor: Class B compact stranded 8000 Series aluminum per ASTM B800 and ASTM B836
Conductor Shield: Semi-conducting cross-linked copolymer; A conductor separator is used for cable size larger than or equal to 500 Kcmil
Insulation: No Lead Ethylene Propylene Rubber (NL-EPR) 133% or 100% Insulation Level
Insulation Shield: Strippable semi-conducting cross-linked copolymer
Copper Tape Shield: Helically wrapped 5 mil copper tape with 25% overlap
Overall Jacket: Polyvinyl Chloride (PVC)
MV-105 Aluminum Three Conductor 5-35 kV, NLEPR/PVC Copper Tape Shield, 133% / 100%
Voltage: 5/8kV, 15kV, 35kV
Conductor: Class B compact stranded 8000 Series aluminum per ASTM B800 and ASTM B836
Conductor Shield: Semi-conducting cross-linked copolymer; A conductor separator is used for cable size larger than or equal to 500 Kcmil
Insulation: No Lead Ethylene Propylene Rubber (NL-EPR) 133% or 100% Insulation Level
Insulation Shield: Strippable semi-conducting cross-linked copolymer
Copper Tape Shield: Helically wrapped 5 mil copper tape with 25% overlap
Grounding Conductor: Class B compressed stranded bare copper ground per ASTM B3 and ASTM B8
Filler: Wax paper filler
Binder: Poly glass tape
Overall Jacket: Polyvinyl Chloride (PVC)
HUADONG CABLE GROUP SINCE 1999
Professional Cables and Wires Manufacturer in China
We can design cables according to your requirement
Verified Manufacturer
