600 & 2000 Volt
Type P Power Cable Single Conductor Unarmored or Armored and Sheathed. (Offshore & Land Rigs)
Conductor: Flexible, soft annealed tinned copper per ASTM B33 & IEEE 1580
Insulation: Irradiation cross-linked Polyolefin 125˚C
Circuit Identification: Vividly pigmented insulation. Colors are available on request per IEEE 1580. The standard color is Dk. Gray
Armor (optional): Bronze Braid – Standard. Tinned Copper Braid – Optional
Jacket (optional): Black, Heavy Duty, Arctic Grade Neoprene. Sunlight resistant
Temperature Rating: UL/CSA 110˚C, IEEE 100˚C
600 Volt
Type P Power Cable Multi-Conductor Unarmored or Armored and Sheathed.(Offshore & Land Rigs)
Conductors: Flexible, Annealed, Tinned Copper per ASTM B33, B8 and B172
Insulation: Crosslinked Polyolefin 125°C
Color Code: IEEE-45, UL1309 or as Specified by Customer
Fillers: When Required, Flame Retardant and Non-Hygroscopic
Binder Tape: Non-Hygroscopic and Non-Wicking
Inner Jacket: Heavy-Duty Arctic Neoprene
Armor: Bronze, Tinned Copper or Aluminum Braid
Outer Sheath: Heavy Duty Arctic Neoprene
600 Volt
Type P Control Cable Multi-Conductor Unarmored or Armored and Sheathed
Conductors: Annealed, Tinned Copper per ASTM B33, B8 and B172
Insulation: Crosslinked Polyolefin 125°C
Color Code: IEEE-45, UL1309 or as Specified by Customer
Fillers: When Required, Flame Retardant and Non-Hygroscopic
Binder Tape: Non-Hygroscopic and Non-Wicking
Inner Jacket: Heavy-Duty Arctic Neoprene
Armor: Bronze, Tinned Copper or Aluminum Braid
Outer Sheath: Heavy Duty Arctic Neoprene
600 Volt
Type P Instrumentation Cable Multi-Shielded Pairs or Triples with Overall Shield, Unarmored or Armored and Sheathed
Conductors: Annealed, Tinned Copper per ASTM B33, B8 and B172
Insulation: Crosslinked Polyolefin 125°C
Pair or Triple Assembly: Two or Three Conductors Twisted with a Tin-Coated Copper Drain Wire, a Helically Applied Aluminum/ Ployester Laminated Tape Shield
Cabling: Required Number of Pairs or Triples Cabled Together
Color Code: IEEE-45, UL1309 or as Specified by Customer
Fillers: When Required, Flame Retardant and Non-Hygroscopic
Overall Shield System: Helically Applied Aluminum/Polyester Laminated Tape Shield in Continuous Contact with Tin-Coated Copper Drain Wire
Inner Jacket: Heavy Duty Arctic Neoprene
Armor: Bronze, Tinned Copper or Aluminum Braid
Outer Sheath: Heavy Duty Arctic Neoprene
Type P Power Cable Single Conductor Armored & Unarmored (Offshore & Land Rigs)
Features
•Thermoset insulation
•Heat, sunlight, & moisture resistant
•Extremely flame retardant
•Easy to install
•Easy to strip – has no separator tape & insulation is not locked into flexible strands
•Extremely flexible
•Flexible Tin-coated conductors for improved terminations and corrosion resistance
•Passes the UL 2225 Crush & Impact Test requirements for Type MC-HL
•Passes minus 55˚C cold bend
•Passes minus 40˚C cold impact
•Jacket – Black, Heavy Duty, Arctic Grade Neoprene
Construction
Conductor: Flexible, soft annealed tinned copper per ASTM B33 & IEEE 1580
Insulation: Irradiation cross-linked Polyolefin 125˚C
Circuit Identification: Vividly pigmented insulation. Colors are available on request per IEEE 1580. The standard color is Dk. Gray
Armor (optional): Bronze Braid – Standard. Tinned Copper Braid – Optional
Jacket (optional): Black, Heavy Duty, Arctic Grade Neoprene. Sunlight resistant
Temperature Rating: UL/CSA 110˚C, IEEE 100˚C
Type P Power Cable Multi-Conductors Armored & Unarmored (Offshore & Land Rigs)
Features
•Thermoset insulation
•Heat, sunlight, & moisture resistant
•Extremely flame retardant
•Easy to install
•Easy to strip – has no separator tape
•Extremely flexible
•Flexible Tin-coated conductors for improved terminations and corrosion resistance
•Pigmented insulation with vivid colors
•Passes the UL 2225 Crush & Impact Test requirements for Type MC-HL
•Passes minus 55˚C cold bend
•Passes minus 40˚C cold impact
Construction
Conductor: Flexible, soft annealed tinned copper per ASTM B33 & IEEE 1580
Insulation: Irradiation cross-linked Polyolefin 125˚C
Circuit Identification: Standard – Vivid pigmented insulation colors per IEEE 1580. Optional – Dk. Gray + No’s
Fillers: When required, flame retardant and non-hygroscopic
Binder Tape: Non-hygroscopic and non-wicking
Inner Jacket: Black, Heavy Duty, Arctic Grade Neoprene. Sunlight resistant
Armor (optional): Bronze Braid – Standard. Tinned Copper – Optional
Outer Jacket (optional): Black, Heavy Duty, Arctic Grade Neoprene. Sunlight resistant
Temperature Rating: UL/CSA 110˚C, IEEE 100˚C
HUADONG CABLE GROUP SINCE 1999
Professional Cables and Wires Manufacturer in China
We can design cables according to your requirement
Verified Manufacturer
